Product Description
Product
Introduction:
APM 20VDC series 1U format
single output 15v DC Programmable Power Supply features wide-adjust output voltages
from 0V-20V and current capabilities up to 60A, offers output power range from
0-600W to 0-1200W. These rack and benchtop models notably provide high power
density, low ripple and a user-friendly front panel.The rms ripple is as low as
6mV. It also covers 1200w DC Power Supply with wide-adjust output voltages.They
are suitable for use in a broad range of ATE, OEM and laboratory applications
such as component testing, semiconductor burn-in, test and measurement, RF
Amplifiers, LED/laser testing.
Except 20V DC Power Supply , there are also higher voltage for options such as 40V DC Power Supply,60V DC Power Supply and etc.
Areas of
Application:
● Automobile Sector: Used for automobile electronics
product testing,and simulation of the voltage waveform of automobile under
different conditions.
● LED Sector: Used for LED driver and LED product
testing and burn-in test.
● Automatic Testing Sector: Can be integrated in
automatic testing system to test electricity parameters, and to supply power to
the products under testing.
● Medical Field:Used for medical device
testing or it being integrated in medical equipment.
● Communication
Sector: Used for the tests of communication power supply and electronic
devices.
● Household Field:Used for household products
test.
● Scientific Research Sector:Used in scientific research units,
colleges & universities,and certification institutions for laboratory
testing and power supply.
● Aerospace Sector: Used for aviation electronic
products testing and power supply.
Product
Features:
● With accurate voltage and current measurement
capability.
● Coded knobs, multifunctional keyboard.
● Standrad
RS232/LAN/RS485/USB interface.
● Remote sensing to compensate for voltage
drop in load leads.
● DVM independent measurement functions.
● Function
of editing List waveform.
● Use SCPI commands.
● CE certified.
Product Advantages:
(1)High efficiency
APM
programmable 20VDC source has an operating efficiency of up to 85%. In the
circuit design, switch tube is using zero (0) voltage conductor and when the
circuit is running, the damage inflicted on the device itself is reduced, and
subsequently increase the overall efficiency while lowering the rate of
temperature rise of the DC source. Compare with other similar types of product
in markets, APM Technologies' programmable DC source has an obvious
advantage.
(2)Ultrafast Respond
Time
The unique fast drop function makes the response of APM programmable DC
source much better than that of any other similar products available on the
market.
|
Model
|
SP20VDC600W
|
SP20VDC1000W
|
SP20VDC1200W
|
|
response(voltage rise
time)
|
≤10ms
|
|
response(voltage drop
time)
|
≤150ms(No load)
|
≤150ms(No load)
|
≤150ms(No load)
|
|
≤20ms(Full load)
|
≤15ms(Full load)
|
≤12ms(Full load)
|
(3)DVM
measurement function
APM programmable DC source's built-in DVM independent
measurement function can measure the value of output voltage at the output
terminal, and display the value at VFD screen by switchover the front-panel
buttons. The DC source can also be used as external equipment in laboratory
testing to measure the voltage values.
(4)Master/Slave Control
In the
master-slave control mode, up to 10 units of APM programmable DC source can be
used in a series or parallel mode.
Master-slave control mode can realize the
effect as "a hundred responses to a (single) call". Once the master-slave mode
is settled, "SLAVE" will be locked in the main interface and exclusively
controlled by "MASTER". When there is a "SLAVE" signaling of protection mode,
all the DC sources will turn off and exit master-slave mode.
(5)Series Mode Functions
APM
programmable 20 VDC source via its RS485 interface can be operated by using up to 31 units of the device ,thus makes it possible to
simultaneously control all the DC sources connected on RS485 from PC.
Technical Specification:
|
Model
|
SP20VDC600W
|
SP20VDC1000W
|
SP20VDC1200W
|
|
1
|
Input Voltage Range
|
90-265VAC
|
|
2
|
Input Frequency Range
|
47-63HZ
|
|
3
|
Power Factor
|
>0.98
|
|
4
|
Input Power
|
750VA(MAX)
|
1300VA(MAX)
|
1500VA(MAX)
|
|
5
|
Output Voltage Range
|
0-20V
|
|
6
|
Output Current Range
|
0-60A
|
|
7
|
Voltage Load Regulation
|
10mV
|
|
8
|
Current Load Regulation
|
60mA
|
|
9
|
Voltage Setting Accuracy
|
0.05%+15mV
|
|
10
|
Current Setting Accuracy
|
0.1%+60mA
|
|
11
|
Voltage Measurement Accuracy
|
0.05%+15mV
|
|
12
|
Current Measurement Accuracy
|
0.1%+60mA
|
|
13
|
Voltage Ripple[1]
|
40mVp-p/6mVrms
|
|
14
|
Current Ripple[1]
|
60mA (Full Range)
20mA (TYP value)
|
|
15
|
Voltage Temperature Coefficient[2]
|
100ppm/℃
|
|
16
|
Current Temperature Coefficient[2]
|
150ppm/℃
|
|
17
|
DVM Resolution
|
0.1mV
|
|
18
|
DVM Accuracy
|
0.05%+15mV
|
|
19
|
Remote Compensation
|
4V MAX
|
|
20
|
Load Transient Response
Time
|
≤2ms
|
|
21
|
Command Response Time
|
50ms
|
|
22
|
Efficiency(Full Load)
|
85%
|
85%
|
84%
|
|
23
|
Protection Function
|
OVP/OCP/OTP/OPP/SCP/Fold back function
|
|
24
|
Weight
|
9.5kg
|
|
25
|
Communication Modes
|
RS232/RS485/USB/LAN
|
|
26
|
Operating Environment
|
Temperature 0~40℃,Relative Humidity 10%~90%(no condensation)
|
[1] Test Condition: Voltage ripple, CV
(Constant Voltage) mode-rated output voltage (Vp-p 20MHZ, Vrms 1.25MHZ);
Current ripple: CC (Constant Current) mode (Arms 1.25MHZ)
Current ripple typical value
parameter standard, test under condition that nominal voltage of the model is
fully loaded, at the same time, when the full range output voltage of the model
is full load output, the effective value of the current ripple is among the
gamut reference range.
[2] Test Condition: Ambient temperature is
among 0~40℃
.png)
Contact Now