Product Description
Product
Introduction:
This 1U 19" rack mount constant power dc power supply outputs 75V voltage,20amp current and power ranging from 600W to 1.5kW. With constant voltage CV and constant current CC mode,numerous features enabling cost effective, easy system integration.Ideally suited for a wide range of applications requiring DC power in a small form factor.
APM provides selection in ouput voltage range. Lowest voltage series is 20V DC Power Supply while highest voltage series includes 1500V High Power DC System.
Areas of
Application:
● LED Sector: Used for LED driver and LED product testing and burn-in test.
● Automobile Sector: Used for automobile electronics product testing,and simulation of the voltage waveform of automobile under different conditions.
● Medical Field:Used for medical device testing or it being integrated in medical equipment.
● Automatic Testing Sector: Can be integrated in automatic testing system to test electricity parameters, and to supply power to the products under testing.
● Communication Sector: Used for the tests of communication power supply and electronic devices.
● Aerospace Sector: Used for aviation electronic products testing and power supply.
● Household Field:Used for household products test.
● Scientific Research Sector:Used in scientific research units, colleges & universities,and certification institutions for laboratory testing and power supply.
Product
Features:
● DVM independent measurement functions.
● Coded knobs, multifunctional keyboard.
● Standrad RS232/LAN/RS485/USB interface.
● Function of editing List waveform.
●
Use SCPI commands.
● CE/UL/CSA/FCC certified.
● With accurate voltage and current measurement capability.
● Remote sensing to compensate for voltage drop in load leads.
Product Advantages:
(1)High efficiency
APM programmable 75VDC source has an operating efficiency
of up to 91%. In the circuit design, switch tube is using zero (0) voltage
conductor and when the circuit is running, the damage inflicted on the device
itself is reduced, and subsequently increase the overall efficiency while
lowering the rate of temperature rise of the DC source. Compare with other
similar types of product in markets, APM Technologies' programmable DC source
has an obvious advantage.
(2)Ultrafast Respond
Time
The unique fast drop function makes the response of APM programmable
75VDC source much better than that of any other similar products available on
the market.
|
Model
|
SP75VDC600W
|
SP75VDC1000W
|
SP75VDC1200W
|
SP75VDC1500W
|
|
response(voltage rise
time)
|
≤10ms
|
|
response(voltage drop
time)
|
≤160ms(No load)
|
≤160ms(No load)
|
≤160ms(No load)
|
≤160ms(No load)
|
|
≤20ms(Full load)
|
≤15ms(Full load)
|
≤12ms(Full load)
|
≤10ms(Full load)
|
(3)DVM measurement
function
APM programmable DC source's built-in DVM independent measurement
function can measure the value of output voltage at the output terminal, and
display the value at VFD screen by switchover the front-panel buttons. The DC
source can also be used as external equipment in laboratory testing to measure
the voltage values.
(4)Master/Slave
Control
In the master-slave control mode, up to 10 units of APM programmable
DC source can be used in a series or parallel mode.
Master-slave control mode
can realize the effect as "a hundred responses to a (single) call". Once the
master-slave mode is settled, "SLAVE" will be locked in the main interface and
exclusively controlled by "MASTER". When there is a "SLAVE" signaling of
protection mode, all the DC sources will turn off and exit master-slave
mode.
(5)Series Mode
Functions
APM programmable 75 VDC source via its RS485 interface can be
operated by using up to 31 units of the device ,thus makes it
possible to simultaneously control all the DC sources connected on RS485 from PC.
Technical Specification:
|
Model
|
SP75VDC600W
|
SP75VDC1000W
|
SP75VDC1200W
|
SP75VDC1500W
|
|
1
|
Input Voltage Range
|
90-265VAC
|
|
2
|
Input Frequency Range
|
47-63Hz
|
|
3
|
Power Factor
|
>0.98
|
|
4
|
Input Power
|
750VA(MAX)
|
1300VA(MAX)
|
1500VA(MAX)
|
1900VA(MAX)
|
|
5
|
Output Voltage Range
|
0-75V
|
|
6
|
Output Current Range
|
0-25A
|
|
7
|
Voltage Load Regulation
|
10mV
|
|
8
|
Current Load Regulation
|
25mA
|
|
9
|
Voltage Setting
Accuracy
|
0.05%+15mV
|
|
10
|
Current Setting
Accuracy
|
0.1%+25mA
|
|
11
|
Voltage Measurement
Accuracy
|
0.05%+15mV
|
|
12
|
Current Measurement
Accuracy
|
0.1%+25mA
|
|
13
|
Voltage Ripple[1]
|
40mVp-p/6mVrms
|
|
14
|
Current Ripple[1]
|
25mA (Full Range)
10mA (TYP value)
|
|
15
|
Voltage Temperature Coefficient[2]
|
100ppm/℃
|
|
16
|
Current Temperature Coefficient[2]
|
150ppm/℃
|
|
17
|
DVM Resolution
|
0.1mV
|
|
18
|
DVM Accuracy
|
0.05%+15mV
|
|
19
|
Remote Compensation
|
4V MAX
|
|
20
|
Load Transient Response
Time
|
≤2ms
|
≤2ms
|
≤2ms
|
≤2ms
|
|
21
|
Command Response Time
|
50ms
|
|
22
|
Efficiency(Full Load)
|
88%
|
89%
|
90%
|
91%
|
|
23
|
Protection Function
|
OVP/OCP/OTP/OPP/SCP/Fold back function
|
|
24
|
Weight
|
9.5kg
|
|
25
|
Communication Modes
|
RS232/RS485/USB/LAN
|
|
26
|
Operating Environment
|
Temperature 0~40℃,Relative Humidity 10%~90%(no condensation)
|
[1] Test Condition: Voltage ripple, CV
(Constant Voltage) mode-rated output voltage (Vp-p 20MHZ, Vrms 1.25MHZ);
Current ripple: CC (Constant Current) mode (Arms 1.25MHZ)
Current ripple typical value
parameter standard, test under condition that nominal voltage of the model is
fully loaded, at the same time, when the full range output voltage of the model
is full load output, the effective value of the current ripple is among the
gamut reference range.
[2] Test Condition: Ambient temperature is
among 0~40℃
.png)
Contact Now