Product Description
Product
Introduction:
This high precision Power Source is convenient for power extension considering user's sustainable requirement,the power unit could extend volatge, current and power flexibly, master-slave control and current-sharing function could realize above requirement perfectly. Wide range of current, in general restarting ,restrating inductive load need current that is maintain it operate normally.APM technologies
products of our company are: Programmable Power Supplies,DC Power Supplies,AC
Power Supplies, DC Electronic load,Three Phase AC Source System,Lab Power
Supply. If you are intrested, please contact us.
Areas of
Application:
● Aerospace Sector: Used for aviation electronic products testing and power supply.
● Household Field:Used for household products test.
● Medical Field:Used for medical device testing or it being integrated in medical equipment.
● LED Sector: Used for LED driver and LED product testing and burn-in test.
● Automobile Sector: Used for automobile electronics product testing,and simulation of the voltage waveform of automobile under different conditions.
● Automatic Testing Sector: Can be integrated in automatic testing system to test electricity parameters, and to supply power to the products under testing.
● Communication Sector: Used for the tests of communication power supply and electronic devices.
● Scientific Research Sector:Used in scientific research units, colleges & universities,and certification institutions for laboratory testing and power supply.
Product
Features:
● Standrad RS232/LAN/RS485/USB interface.
● Remote sensing to compensate for voltage drop in load leads.
● DVM independent measurement functions.
● Function of editing List waveform.
● Coded knobs, multifunctional keyboard.
● CE/UL/CSA/FCC certified.
● With accurate voltage and current measurement capability.
●
Use SCPI commands.
Product Advantages:
(1)High efficiency
APM programmable 150VDC source has an operating efficiency
of up to 93%. In the circuit design, switch tube is using zero (0) voltage
conductor and when the circuit is running, the damage inflicted on the device
itself is reduced, and subsequently increase the overall efficiency while
lowering the rate of temperature rise of the DC source. Compare with other
similar types of product in markets, APM Technologies' programmable DC source
has an obvious advantage.
(2)Ultrafast Respond Time
The unique fast
drop function makes the response of APM programmable 150VDC source much better
than that of any other similar products available on the market.
|
No load voltage
rise time
|
≤25ms
|
Full load
voltage rise time
|
≤25ms
|
|
No load voltage
drop time
|
≤500ms
|
Full load
voltage drop time
|
≤25ms
|
(3)DVM measurement function
APM programmable
DC source's built-in DVM independent measurement function can measure the value
of output voltage at the output terminal, and display the value at VFD screen by
switchover the front-panel buttons. The DC source can also be used as external
equipment in laboratory testing to measure the voltage
values.
(4)Master/Slave Control
In the master-slave control mode, up
to 8 units in series and 10 units in parallel.
Master-slave control mode can realize the effect as "a hundred
responses to a (single) call". Once the master-slave mode is settled, "SLAVE"
will be locked in the main interface and exclusively controlled by "MASTER".
When there is a "SLAVE" signaling of protection mode, all the DC sources will
turn off and exit master-slave mode.
(5)Series Mode Functions
APM programmable 150
VDC source via its RS485 interface can be operated by using up
to 31 units of the device ,thus makes it possible to simultaneously control all
the DC sources connected on RS485 from PC.
Technical Specification:
|
Model
|
SPS150VDC1000W
|
SP150VDC2000W
|
SP150VDC3000W
|
SP150VDC4000W
|
|
1
|
Input Voltage Range
|
90-265VAC
|
190-265VAC
|
190-265VAC
|
190-265VAC
|
|
2
|
Input Frequency Range
|
47-63Hz
|
|
3
|
Power Factor
|
>0.98
|
|
4
|
Input Power
|
1300VA(MAX)
|
2400VA(MAX)
|
3400VA(MAX)
|
4500VA(MAX)
|
|
5
|
Output Voltage Range
|
0-150V
|
|
6
|
Output Current Range
|
0-30A
|
|
7
|
Voltage Load Regulation
|
15mV
|
|
8
|
Current Load Regulation
|
30mA
|
|
9
|
Voltage Setting
Accuracy
|
0.1%+15mV
|
|
10
|
Current Setting
Accuracy
|
0.1%+30mA
|
|
11
|
Voltage Measurement
Accuracy
|
0.1%+15mV
|
|
12
|
Current Measurement
Accuracy
|
0.1%+30mA
|
|
13
|
Voltage Ripple[1]
|
80mVp-p/15mVrms
|
|
14
|
Current Ripple[1]
|
60mA (Full Range)
10mA (TYP value)
|
|
15
|
Voltage Temperature Coefficient[2]
|
100ppm/℃
|
|
16
|
Current Temperature Coefficient[2]
|
150ppm/℃
|
|
17
|
DVM Resolution
|
1mV
|
|
18
|
DVM Accuracy
|
0.1%+15mV
|
|
19
|
Remote Compensation
|
5V MAX
|
|
20
|
Load Transient Response
Time
|
≤2ms
|
≤3ms
|
≤2.5ms
|
≤2.5ms
|
|
21
|
Command Response Time
|
50ms
|
|
22
|
Efficiency(Full Load)
|
88%
|
90%
|
92%
|
93%
|
|
23
|
Protection Function
|
OVP/OCP/OTP/OPP/SCP/Fold back function
|
|
24
|
Weight
|
13.2kg
|
|
25
|
Communication Modes
|
Standard:RS232/RS485/USB/LAN,
Option:RS232/RS485/USB/LAN/GPIB
|
|
26
|
Operating Environment
|
Temperature 0~40℃,Relative Humidity 10%~90%(no condensation)
|
[1] Test Condition: Voltage ripple, CV
(Constant Voltage) mode-rated output voltage (Vp-p 20MHZ, Vrms 1.25MHZ);
Current ripple: CC (Constant Current) mode (Arms 1.25MHZ)
Current ripple typical value
parameter standard, test under condition that nominal voltage of the model is
fully loaded, at the same time, when the full range output voltage of the model
is full load output, the effective value of the current ripple is among the
gamut reference range.
[2] Test Condition: Ambient temperature is
among 0~40℃
.png)
Contact Now
